→ Customized MEMS based inertial measurement units and inertial navigation systems (with integrated GPS) for low to high end applications demanding high degree of precision in orientation and location

The device can be customized according to,

• - Desired output refresh rate/ frequency
• - Type of Digital Interface (UART TTL compatible/RS232 Serial/High Speed SPI bus)
• - User defined sizing constraints/footprint size
• - Acceleration / angular rate specification

These sensing devices are most suitable for unmanned aerial vehicles (UAV), micro aerial vehicles (MAV), unmanned ground vehicles (UGV), ground robots, autopilot for boats/vessels and other autopilot applications.

→ Affordable customized sensors and sensor networks for precise pressure and temperature measurements.

We can provide low cost absolute and differential pressure sensing devices measuring pressure from 0 to 1000 KPA (or up to 150 PSI) and temperature sensing devices with temperature measurement range of -55ºC to 150 ºC as OEM devices and as complete products aimed for end-users. These devices can be used in factories/plants, industrial process control, thermostat systems and real-time parameter monitoring systems.

→ Single, dual and tri-axial accelerometers for low and high g measurements with variable bandwidth which can be used for applications spanning navigation and vibration sensing to platform stabilization

Accelerometers are available with analog and digital interface and an interface cable to make the device easily usable. The sensors have bandwidths ranging from 1 Hz up to 10000 Hz and can be used for industrial, automotive and aerospace applications where low noise, bias and high precision without lag in sensing are desired.

→ Proximity sensing systems for use in today’s challenging traffic situation, suitable for OEM applications with high accuracy

These systems have measurement accuracy of up to 1 cm. Being miniature, these can fit into a cube of size 5cm x 5cm x 5cm. Use these sensors in automotive, industrial and automation applications where reliability and low cost of overall system are desirable.

→ Use customized altitude measurement devices for applications including navigation, avionics, sports, mountaineering etc. Make these sensors part of your instrumentation for real-time height monitoring.

• - Height measurement range from 0 up to 10 kilometers
• - Accuracy of up to 1 meter
• - Real-time altitude output

→ Precise tri-axial magnetometer and display module with a small size and low cost for aligning in industries, heading correction in aircrafts and naval vessels.

General features:

• - Heading sensor modules with LCD display/Digital output
• - Accuracy up to 0.5 degrees
• - Available as end-solutions and as sensor boards for OEMs
• - Small sensor board size 2.5 cm x 2.5 cm
• - Variable output rate for real-time heading information